About Rod Lecetivo

  • Academic Level Degree Bachelor
  • Salary 1850
  • Gender Male
  • Industry Development
  • Viewed 67

About me

Licensed Mechanical Engineer in PH since 2012. 10 years of continuous professional learning experience & service. Providing innovative solutions, recommendations, collaborative ideas to our problem, and coaching confrére.

Education

  • 2007 - 2021
    Camarines Sur Polytechnic Colleges

    Bachelor of Science in Mechanical Engineering

    Activities and societies: Philippine Society of Mechanical Engineering Student Unit Nabua Chapter President 2011-2012 -seminars, tree planting, nationwide tour Bicol Regional Students Council Unit- PSME Public Information Officer 2011-2012 -organize the regional convention, team building Mechanical Engineering representative 2010-1011Activities and societies: Philippine Society of Mechanical Engineering Student Unit Nabua Chapter President 2011-2012 -seminars, tree planting, nationwide tour Bicol Regional Students Council Unit- PSME Public Information Officer 2011-2012 -organize the regional convention, team building Mechanical Engineering representative 2010-1011 A public ladderize college; Two year certificate in Machine Shop Technology-March 31, 2009 Three-Year Diploma in Mechanical Technology-April 12, 2010 Bachelor of Science in Mechanical Engineering-March 29, 2012 2010-2011 Central Student Council- Mechanical Engineering Representative 2011-2012 President of PSME Junior Unit Nabua Chapter (Philippine Society of Mechanical Engineering) major achievement: Conducted workshop, and most specially tree planting. Objective is 'correlate the engineering works with environment in every engineering practice in the near future.' 2011-2012 Public Information Officer of BRCSU-PSME (Bicol Regional Council Student Unit) Conducted a yearly Reginal Seminar with partnership in regional students mechanical engineering presidents held in our college campus last September 13-15, 2011 First batch in 5 year to have a course in MECHATRONICS, uses Logic Pro and UG NX5 software and C++ programming.A public ladderize college; Two year certificate in Machine Shop Technology-March 31, 2009 Three-Year Diploma in Mechanical Technology-April 12, 2010 Bachelor of Science in Mechanical Engineering-March 29, 2012 2010-2011 Central Student Council- Mechanical Engineering Representative 2011-2012 President of PSME Junior Unit Nabua Chapter (Philippine Society of Mechanical Engineering) major achievement: Conducted workshop, and most specially tree planting. Objective is 'correlate the engineering works with environment in every engineering practice in the near future.' 2011-2012 Public Information Officer of BRCSU-PSME (Bicol Regional Council Student Unit) Conducted a yearly Reginal Seminar with partnership in regional students mechanical engineering presidents held in our college campus last September 13-15, 2011 First batch in 5 year to have a course in MECHATRONICS, uses Logic Pro and UG NX5 software and C++ programming. Skills: Mechanical Engineering · Leadership · Continuous Improvement · Microsoft Office · Computer-Aided Design (CAD) · Microsoft Excel · Critical Thinking · Strategic Thinking · Self-confidence

Experience

  • 2019 - Present
    MHIAP Manila Branch

    BIM Provider and Piping Designer

    Executive Level in Design Interpretation.

    Competitive experience in APM (Automatic People Mover) and Railways Design Concept
    The role is responsible for the delivery of design interpretation services. This includes the following:

    Develop and Improve 5 Dynamo Script in Revit for Bridge and Rail 3D Modeling which improves productivity and reduces error.

    Improve Revit Family for CANT areas in curve and transition by formulating Parameters and use of excel Data and Dynamo execution.

    Productivity Improvement at 200% more.

    Coaching and Mentoring colleagues to have a shared understanding and have better judgment and brainstorming in DESIGN REVIEW.

    Research and development of the new concept.
    Solo Designing the whole rail project to find ways into automation and how we can make it faster without compromising quality.
    Generating Manuals and work instructions for the designer as a guide and brainstorming with the new pointers to improve and develop with the current system.
    Interior Design.Executive Level in Design Interpretation. Competitive experience in APM (Automatic People Mover) and Railways Design Concept The role is responsible for the delivery of design interpretation services. This includes the following: Develop and Improve 5 Dynamo Script in Revit for Bridge and Rail 3D Modeling which improves productivity and reduces error. Improve Revit Family for CANT areas in curve and transition by formulating Parameters and use of excel Data and Dynamo execution. Productivity Improvement at 200% more. Coaching and Mentoring colleagues to have a shared understanding and have better judgment and brainstorming in DESIGN REVIEW. Research and development of the new concept. Solo Designing the whole rail project to find ways into automation and how we can make it faster without compromising quality. Generating Manuals and work instructions for the designer as a guide and brainstorming with the new pointers to improve and develop with the current system. Interior Design.
    Skills: Engineering · Revit · Mechanical Engineering · Autodesk BIM AEC [Revit (Dynamo), Navisworks Manage, Recap Pro, Civil 3D, Infraworks] · BIM Infrastructure Rail and Bridge Design and Modeling · Design Review · Process Improvement · Leadership · Continuous Improvement · Research and Development (R&D) · Innovation Development · AutoCAD · Microsoft Office · Attention to Details · Computer-Aided Design (CAD) · Microsoft Excel · Business Ethics · Project Communications · Stakeholder Management · Critical Thinking · Microsoft Project · Risk Management · Project Team Management · Strategic Thinking · Self-confidence

  • 2017 - 2017
    Haksan Internationa Inc.

    Cost & Estimate Engineer

    •Interpret HVAC designs
    • Check the quotation of Sales team.
    • Check the combination of indoor and outdoor VRF system
    • SAKE Bio Clean Duct Estimate
    • Created a VRF Installation and Unit price estimate (Samsung, LG, MITAIR, DAIKIN)
    • Use of LG, DAIKIN, MITAIR and Samsung Multi V, VRV, VRF DVM-S selection software
    • Research and develop new ways of computation via excel for fast and much more accurate result.
    • Coordinate with purchasing for the material pricing, specification etc.
    • Consult other technical and sales engineers of different company on the capacity and requirement of clients.
    • Directly reporting to Korean Managing Director for the concerns.
    • May be direct and coordination with the sales team from the client with regards to estimate and quotation.
    • May be direct and coordination with the purchasing for the accessories such as diffuser, vibrator etc.
    o Software: Excel, Skype• Interpret HVAC designs • Check the quotation of Sales team. • Check the combination of indoor and outdoor VRF system • SAKE Bio Clean Duct Estimate • Created a VRF Installation and Unit price estimate (Samsung, LG, MITAIR, DAIKIN) • Use of LG, DAIKIN, MITAIR and Samsung Multi V, VRV, VRF DVM-S selection software • Research and develop new ways of computation via excel for fast and much more accurate result. • Coordinate with purchasing for the material pricing, specification etc. • Consult other technical and sales engineers of different company on the capacity and requirement of clients. • Directly reporting to Korean Managing Director for the concerns. • May be direct and coordination with the sales team from the client with regards to estimate and quotation. • May be direct and coordination with the purchasing for the accessories such as diffuser, vibrator etc. o Software: Excel, Skype
    Skills: Engineering · Mechanical Engineering · Continuous Improvement · Microsoft Office · Attention to Details · Microsoft Excel · Business Ethics · Project Communications · Critical Thinking · Risk Management · Strategic Thinking · Self-confidence

  • 2013 - 2016
    JFE Techno Manila Inc.

    Mechanical Engineer

    Mechanical Engineer (Waste Treatment Plant) TSK Section
    (Tsukishima Kikai Co Ltd in Japan)
    • Interpret Piping Layout, Piping Support Layout, Structural Layout, P&ID, UFD, PMS, LED Sheet, JIS Piping Handbook
    • Create and Revise P&ID (Piping and Instrumentation Diagram, UFD (Utility Flow Diagram), PMS (Piping Material Specification), Piping Arrangement, Piping Supports Detail drawing, Piping Support Layout, • Create and Check Isometric Piping Drawing, Piping Support Detail Drawing with (MTO-Material Take Off) base on Japanese counterpart Piping Arrangement Drawing, PMS, UFD, P&ID, Equipment Detail Drawings, and Lead Sheet. (Considering TP (Tokyo Point), COP (Center of Pipe), BOP (Bottom of Pipe), Length, Plant North, Pipe size, material, fluid that flow on pipe, spool no., welding note, and note for insulating sleeve for flange in connection to SUS and other metal, etc.
    • Experience in Internal Quality Audit, KPI, Customer Feedback
    • Book Keeper of JIS Handbooks, Catalog, ASTM.
    • Create and Revise Standards and Manuals
    • Create and Conduct Workshop Presentation (such as Know How for continuous improvement)
    • Create, Revise and Check P&ID, and Piping Arrangement Drawing base on our Japanese counterpart requirement.
    • Study Nihongo
    o Software: AutoCAD LT, EYECAD, Navisworks, Microsoft Word, Excel, PowerPoint, Outlook, Skype for Business, PDF Creator

    2016
    -Develop a Support calculation sheet in Excel file with macro.
    Objective is to eliminate human error in calculating manually. Wherein simply select a type, size and material of angle bar, channel, H beam, pipe (stanchion support), plate. Then on the other sheet the summarize result.
    -Develop a Dynamic Block of pipe size for piping support.
    Inspired by Standard built-in tool pallete block of H-beams which has a drop down list for sizes and different views respectively.Mechanical Engineer (Waste Treatment Plant) TSK Section (Tsukishima Kikai Co Ltd in Japan) • Interpret Piping Layout, Piping Support Layout, Structural Layout, P&ID, UFD, PMS, LED Sheet, JIS Piping Handbook • Create and Revise P&ID (Piping and Instrumentation Diagram, UFD (Utility Flow Diagram), PMS (Piping Material Specification), Piping Arrangement, Piping Supports Detail drawing, Piping Support Layout, • Create and Check Isometric Piping Drawing, Piping Support Detail Drawing with (MTO-Material Take Off) base on Japanese counterpart Piping Arrangement Drawing, PMS, UFD, P&ID, Equipment Detail Drawings, and Lead Sheet. (Considering TP (Tokyo Point), COP (Center of Pipe), BOP (Bottom of Pipe), Length, Plant North, Pipe size, material, fluid that flow on pipe, spool no., welding note, and note for insulating sleeve for flange in connection to SUS and other metal, etc. • Experience in Internal Quality Audit, KPI, Customer Feedback • Book Keeper of JIS Handbooks, Catalog, ASTM. • Create and Revise Standards and Manuals • Create and Conduct Workshop Presentation (such as Know How for continuous improvement) • Create, Revise and Check P&ID, and Piping Arrangement Drawing base on our Japanese counterpart requirement. • Study Nihongo o Software: AutoCAD LT, EYECAD, Navisworks, Microsoft Word, Excel, PowerPoint, Outlook, Skype for Business, PDF Creator 2016 -Develop a Support calculation sheet in Excel file with macro. Objective is to eliminate human error in calculating manually. Wherein simply select a type, size and material of angle bar, channel, H beam, pipe (stanchion support), plate. Then on the other sheet the summarize result. -Develop a Dynamic Block of pipe size for piping support. Inspired by Standard built-in tool pallete block of H-beams which has a drop down list for sizes and different views respectively.
    Skills: Engineering · Mechanical Engineering · Waste Water Treatment , Water Purification, Carbonization and Incinerator Plant · Design Review · Process Improvement · Leadership · Continuous Improvement · Research and Development (R&D) · Innovation Development · AutoCAD · Microsoft Office · EYECAD · Attention to Details · Computer-Aided Design (CAD) · Microsoft Excel · Business Ethics · Project Scheduling · Project Communications · Critical Thinking · Risk Management · Strategic Thinking · Self-confidence

  • 2013 - 2016
    JFE Techno Manila Inc.

    Mechanical Engineer

    Mechanical Engineer (Waste Treatment Plant) TSK Section
    (Tsukishima Kikai Co Ltd in Japan)
    • Interpret Piping Layout, Piping Support Layout, Structural Layout, P&ID, UFD, PMS, LED Sheet, JIS Piping Handbook
    • Create and Revise P&ID (Piping and Instrumentation Diagram, UFD (Utility Flow Diagram), PMS (Piping Material Specification), Piping Arrangement, Piping Supports Detail drawing, Piping Support Layout, • Create and Check Isometric Piping Drawing, Piping Support Detail Drawing with (MTO-Material Take Off) base on Japanese counterpart Piping Arrangement Drawing, PMS, UFD, P&ID, Equipment Detail Drawings, and Lead Sheet. (Considering TP (Tokyo Point), COP (Center of Pipe), BOP (Bottom of Pipe), Length, Plant North, Pipe size, material, fluid that flow on pipe, spool no., welding note, and note for insulating sleeve for flange in connection to SUS and other metal, etc.
    • Experience in Internal Quality Audit, KPI, Customer Feedback
    • Book Keeper of JIS Handbooks, Catalog, ASTM.
    • Create and Revise Standards and Manuals
    • Create and Conduct Workshop Presentation (such as Know How for continuous improvement)
    • Create, Revise and Check P&ID, and Piping Arrangement Drawing base on our Japanese counterpart requirement.
    • Study Nihongo
    o Software: AutoCAD LT, EYECAD, Navisworks, Microsoft Word, Excel, PowerPoint, Outlook, Skype for Business, PDF Creator

    2016
    -Develop a Support calculation sheet in Excel file with macro.
    Objective is to eliminate human error in calculating manually. Wherein simply select a type, size and material of angle bar, channel, H beam, pipe (stanchion support), plate. Then on the other sheet the summarize result.
    -Develop a Dynamic Block of pipe size for piping support.
    Inspired by Standard built-in tool pallete block of H-beams which has a drop down list for sizes and different views respectively.Mechanical Engineer (Waste Treatment Plant) TSK Section (Tsukishima Kikai Co Ltd in Japan) • Interpret Piping Layout, Piping Support Layout, Structural Layout, P&ID, UFD, PMS, LED Sheet, JIS Piping Handbook • Create and Revise P&ID (Piping and Instrumentation Diagram, UFD (Utility Flow Diagram), PMS (Piping Material Specification), Piping Arrangement, Piping Supports Detail drawing, Piping Support Layout, • Create and Check Isometric Piping Drawing, Piping Support Detail Drawing with (MTO-Material Take Off) base on Japanese counterpart Piping Arrangement Drawing, PMS, UFD, P&ID, Equipment Detail Drawings, and Lead Sheet. (Considering TP (Tokyo Point), COP (Center of Pipe), BOP (Bottom of Pipe), Length, Plant North, Pipe size, material, fluid that flow on pipe, spool no., welding note, and note for insulating sleeve for flange in connection to SUS and other metal, etc. • Experience in Internal Quality Audit, KPI, Customer Feedback • Book Keeper of JIS Handbooks, Catalog, ASTM. • Create and Revise Standards and Manuals • Create and Conduct Workshop Presentation (such as Know How for continuous improvement) • Create, Revise and Check P&ID, and Piping Arrangement Drawing base on our Japanese counterpart requirement. • Study Nihongo o Software: AutoCAD LT, EYECAD, Navisworks, Microsoft Word, Excel, PowerPoint, Outlook, Skype for Business, PDF Creator 2016 -Develop a Support calculation sheet in Excel file with macro. Objective is to eliminate human error in calculating manually. Wherein simply select a type, size and material of angle bar, channel, H beam, pipe (stanchion support), plate. Then on the other sheet the summarize result. -Develop a Dynamic Block of pipe size for piping support. Inspired by Standard built-in tool pallete block of H-beams which has a drop down list for sizes and different views respectively.
    Skills: Engineering · Mechanical Engineering · Waste Water Treatment , Water Purification, Carbonization and Incinerator Plant · Design Review · Process Improvement · Leadership · Continuous Improvement · Research and Development (R&D) · Innovation Development · AutoCAD · Microsoft Office · EYECAD · Attention to Details · Computer-Aided Design (CAD) · Microsoft Excel · Business Ethics · Project Scheduling · Project Communications · Critical Thinking · Risk Management · Strategic Thinking · Self-confidence

  • 2013 - 2013
    Arms Corporation of the Philippines

    Fire Arms Engineering Designer

    • Interpret Manufacturing Process Design
    • Design Jigs and fixtures, racks, and push carts for gun parts at Fire Arms Engineering Department.
    Hired thru agency ‘Mother Ignacia Service Cooperative’

    • With the guidance of my supervisor in just 1-2 months one of my fixtures designed for vertical barrel bushing was made possible and in use.
    With constant monitoring of the designed model in our tooling.

    • Design of fiberglass protection cover for safety measures of the operator. The safety of the operator in operating the said process is high value.

    • Constant monitoring of the amount of pressure before the operation is highly promoted for the safety and quality output of the product in the process.

    • Calculate the comparison of run time to the previous horizontal barrel bushing press. Quantity estimate per day.

    • Monitor the number of cycles before the failure of a certain part of the Fixture design for the quality of each and every finished product in this operation.
    constantly monitoring the amount of pressure before the operation is highly promoted for the safety and quality output of the product in the process.

    • Wherein in every design there is a principle to consider that the first thing to fail is the smallest and can easily be replaced. So that the cost of maintenance and quality of products will remain.

    • Design made possible to work by my supervisor whom he personally monitored thru his experience.

    • Did a hardness test for the new metals introduced by the client.

    • Taking action and giving results. Priority is safety first.

    • Computer Literate: Solidworks, AutoCAD, Microsoft Excel, Word, PowerPoint.

    • Competitive and make the job faster with accuracy and urgency.• Interpret Manufacturing Process Design • Design Jigs and fixtures, racks, and push carts for gun parts at Fire Arms Engineering Department. Hired thru agency ‘Mother Ignacia Service Cooperative’ • With the guidance of my supervisor in just 1-2 months one of my fixtures designed for vertical barrel bushing was made possible and in use. With constant monitoring of the designed model in our tooling. • Design of fiberglass protection cover for safety measures of the operator. The safety of the operator in operating the said process is high value. • Constant monitoring of the amount of pressure before the operation is highly promoted for the safety and quality output of the product in the process. • Calculate the comparison of run time to the previous horizontal barrel bushing press. Quantity estimate per day. • Monitor the number of cycles before the failure of a certain part of the Fixture design for the quality of each and every finished product in this operation. constantly monitoring the amount of pressure before the operation is highly promoted for the safety and quality output of the product in the process. • Wherein in every design there is a principle to consider that the first thing to fail is the smallest and can easily be replaced. So that the cost of maintenance and quality of products will remain. • Design made possible to work by my supervisor whom he personally monitored thru his experience. • Did a hardness test for the new metals introduced by the client. • Taking action and giving results. Priority is safety first. • Computer Literate: Solidworks, AutoCAD, Microsoft Excel, Word, PowerPoint. • Competitive and make the job faster with accuracy and urgency.
    Skills: Engineering · Mechanical Engineering · Design Review · Process Improvement · Continuous Improvement · Research and Development (R&D) · Jigs and Fixture Design · SolidWorks · Microsoft Office · Attention to Details · Computer-Aided Design (CAD) · Microsoft Excel · Business Ethics · Project Communications · Critical Thinking · Risk Management · Strategic Thinking · Self-confidence

Expertise

Microsoft Office Word, PowerPoint, Outlook, Excel, One Note, Teams, Skype of Business
Leadership
Project Management
BIM Provider
Autodesk AEC (AutoCAD, Civil 3D, Recap Pro, Navisworks Manage, Infraworks, Revit ..)
Autodesk AEC (AutoCAD, Civil 3D, Recap Pro, Navisworks Manage, Infraworks, Revit ..)
Adobe Acrobat PDF
Design Interpretation
Design Modeling
Teamwork and Human Relation
Client Order
Sales

Languages

English
Intermediate
Japanese
Beginner

Skills

Leave Your Review

  • Overall Rating 0